Measured 2026-07-16 · R.M.SKU CAL-CRY-BH1

Bino Harness

Name: Bino Harness — Calibrated Supply Co.
Brand: Calibrated
SKU: CAL-CRY-BH1
Price: 109.00 USD
Availability: InStock
Rating: 4.9 (731 reviews)

Chest carry for binoculars, sized to your glass

4.9 / 5731 reviews

A magnet lid that opens one-handed with a glove on, and a rain figure from an actual spray rig rather than the word 'weather-resistant'.

$109.00

CAL-CRY-BH1 · USD

In stock

Fit

Sizes are confirmed by email before dispatch, so a wrong choice here costs nothing.

Qualifies for free standard shipping · 3–5 business days
60-day returns. One-time purchase — no subscription and no recurring charge.
Weight 236 g / 8.3 oz, measured 2026-07-16 on A&D EK-6100i, ±1 g. The same numbers are printed on the Field Card in the box.

Your card statement will show CALIBRATED SUPPLY for this order, not “Calibrated”. Questions? support@calibratedsupply.com · +1 (714) 269-7133.

Measured

How we measure

Weight

236 g / 8.3 oz

Mid size, straps fitted, lid closed.

Internal opening

150 × 132 × 78 mm

Measured empty at the widest point of each axis.

Lid open, one hand

Magnet, 2.4 kg pull

Opens on a pull, closes on release. No zip on the primary opening.

Rain over the lid

60 min at 25 mm/h, dry inside

Bench spray rig, harness on a torso form, no cover fitted.

Taken 2026-07-16 on A&D EK-6100i, ±1 g by R.M.. The same values are printed on the Field Card in your box, so the page and the carton can never disagree.

What it is made of

Brushed 210D face fabric118 g/m²
Same quiet face as the Day Bag.
Closed-cell foam walls6 mm
Keeps glass off your sternum on a downhill.
N42 magnets2.4 kg pull
Strong enough for a bounce, weak enough for a glove.

The full description

Most binocular harnesses fail on the same detail: the lid. A zip needs two hands and makes a noise at the worst moment; a buckle needs to be found. This one is a magnet closure with a 2.4 kg pull — enough that glass stays put through a stumble, light enough to open with a mitten.

Two sizes, because a 10×42 rattling around inside a case built for a 15×56 is worse than no case. Check the internal opening against your glass before ordering; the numbers are in the spec table for exactly that.

Bought for

Anyone carrying binoculars for more than an hour at a time.

Not for

Glass larger than 15×56, and any binocular with an integrated rangefinder body wider than 78 mm.

Field notes

01Set the straps so the case sits just under your collarbone. Lower than that and it swings on a climb.
02The side pockets take a rangefinder and a wind checker. Nothing else fits, on purpose.
03In sustained rain, run the tether short so the lid closes under its own weight when you drop the glass.

In the box

Harness with case
Binocular tether, 2
Rangefinder tether
Field Card

Construction, care and warranty

Construction: Brushed 210D polyester face with 6 mm closed-cell foam walls and a brushed tricot lining; N42 neodymium lid magnets sewn into bound pockets; webbing shoulder and back straps with ladder-lock adjustment; all tether points bar-tacked.
Care: Wipe out with a damp cloth. Do not machine wash — the foam walls take a set and never recover.
Warranty: Repaired or replaced for life against failure in normal hunting use.
Bought for: Western, Whitetail, Late season
SKU: CAL-CRY-BH1
Price: $109.00 USD

Goes with this